T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
E:
hib.co.uk
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
This product is IP44 rated and suitable for installation in
zones:
FI
#01 028
R
191120
Ver No.
1.0 Jan 2020
2
&
Outside Zone
All installations must comply with guidelines which are based on a
zonal concept. The diagram above illustrates this concept and must be
followed to ensure the safe installation of electrical appliances in the
bathroom. These regulations apply to domestic installations only.
HiB recommends that all electrical bathroom products must
be installed in accordance with current building and wiring
regulations. If in doubt please contact an electrician.
Thank you for purchasing this HiB product
Please read through these instructions carefully and refer back to
them during installation to ensure that your product is fitted safely
and that it retains its high quality finish.
Please retain this leaflet for future reference
Before installation, ensure the domestic electrical mains supply
to which the mirror is to be connected is turned off.
Before drilling, ensure that there are no hidden cables or pipes
in the wall.
Care Instructions
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a soft, damp
cloth.
Aftercare Service
In the unlikely event that this product should fail please contact HiB
customer services, details shown below.
(Fig. 1)
Illuminated Mirrors
with Bluetooth
®
connectivity
Globe Plus 50
Art No. 78721000
/ Globe Plus 60
Art No. 78722000
/
Globe Plus 80
Art No. 78723000
Installation
1. Position the mirror in a suitable location (according to the zonal
diagram -
Fig. 1
), ensuring that the domestic electrical mains
supply is within reach of the electrical entry point of the product.
2. Carefully mark the position of the mirror using a soft pencil
ensuring it is level.
3. Remove the mirror and mark the mounting points on the wall
(
Fig. A
)
Please ensure that all marked mounting points
accurately match up with the fixing points on the mirror.
4. Using a suitable drill bit, drill holes in the marked positions to a
suitable depth. If drilling through tile, use a ceramic drill bit.
5. Insert wall plugs level with the surface of the wall. If fitting to a
tiled surface, wall plugs should be inserted below the tile surface
to avoid cracking.
NB.
For plasterboard walls, specialist fixings
should be purchased, available from any DIY or hardware store.
6. Screw supplied fixings into wall plugs.
7. Ensure the domestic electrical mains supply to which the
mirror is being connected is turned off.
Connect the domestic
mains supply to the terminal box according to the wiring diagram
(
Fig. B
) below.
8. Hang the mirror in position.
9. Switch the domestic electrical mains supply for the mirror back on.
NB.
LED Mirrors with charging socket only;
On first use of the
charging socket, there may be resistance when inserting the plug.
Make sure that the mirror is held firmly so that it is not pushed off the
wall. After a few uses, resistance will ease and the socket will function
as normal.
Mounting Points Diagram (Fig. A)
Hanging landscape
mounting points
REAR VIEW
Live
Earth
Neutral
MAINS SUPPLY
LUMINAIRE
Live supply can be Red or Brown
Earth supply is Green and Yellow
Neutral supply can be Blue or Black
Live supply is Brown
Earth supply is Green and Yellow
Neutral supply is Blue
Wiring Diagram (Fig. B)
