HIAB K-HiPro 285-425-4 Series Скачать руководство пользователя страница 67

Страница: 67 / 114

Place the extra support plates

• Place the extra support plates under the stabiliser leg

plates.

DANGER

Check that the support plates do not bend or sink into the ground!

Non-tiltable stabiliser legs

1. Make sure that the stabiliser extensions are extended.
2. Position the extra support plate (1) onto the ground (if

delivered).

3. Operate the stabiliser leg downwards until it is set to

the ground.

5.3. Operate the boom system out of transport position

WARNING

• A crane with add-on equipment can differ from the operations described in this

section. For this reason, study the operating instructions for any add-on

equipment carefully.

• Always ensure that the stabiliser extensions and legs are in working position and

securely locked before operating the boom system out of parking position.

DANGER

Always operate a manually controlled crane

from the position shown in the image!

Starting crane operation

HIAB K-HiPro 285-425 X4

Содержание K-HiPro 285-425-4 Series



















































































































Результаты поиска

Содержание K-HiPro 285-425-4 Series

Отзывы:

Похожие инструкции для K-HiPro 285-425-4 Series

Бренды по названию

Популярные бренды

HIAB K-HiPro 285-425-4 Series, Руководство оператора

Результаты поиска

Содержание K-HiPro 285-425-4 Series

Отзывы:

Похожие инструкции для K-HiPro 285-425-4 Series

Бренды по названию

Популярные бренды