HIAB K-HiPro 285-425-4 Series Скачать руководство пользователя страница 63

Страница: 63 / 114

5.2. Set the stabiliser system

To ensure the maximum stability of the vehicle, all the

stabiliser extensions and legs must be fully extended and

set to the ground without lifting the wheels from the ground.
• Cranes with VSL: when the stabiliser extensions are not

fully extended, the lifting capacity is optimized by the

VSL function to ensure the maximum stability of the

vehicle.

• Cranes without VSL: crane must be operated with the

stabiliser extensions fully extended and the stabiliser

legs set to the ground without lifting the wheels from the

ground, otherwise the stability of the vehicle will not be

ensured.

DANGER

For cranes without VSL the operator is the responsible to make sure that the

vehicle is stable while lifting a load and the maximum load is not exceeded.

Stability sector indication

The operator must have a full view of the stabiliser system when operating it. To confirm a full view
of the stabiliser system, button

is pushed on the user panel on the side where the stabiliser

system is going to be operated. As soon as the button has been pushed, the LED for the active

stabiliser leg will light green.
• Cranes with VSL: the stability sector LEDs will indicate the crane capacity in six different sectors

due to stability. The stability sector indication will change according to the stabiliser system

position.

• Cranes without VSL: the stability sector LEDs will light green regardless of the situation. The

operator is the responsible to make sure that the vehicle is stable while lifting a load.

Starting crane operation

HIAB K-HiPro 285-425 X4

Содержание K-HiPro 285-425-4 Series



















































































































Результаты поиска

Содержание K-HiPro 285-425-4 Series

Отзывы:

Похожие инструкции для K-HiPro 285-425-4 Series

Бренды по названию

Популярные бренды

HIAB K-HiPro 285-425-4 Series, Руководство оператора

Результаты поиска

Содержание K-HiPro 285-425-4 Series

Отзывы:

Похожие инструкции для K-HiPro 285-425-4 Series

Бренды по названию

Популярные бренды