HIAB Hooklift Multilift XR S Series Скачать руководство пользователя

Страница: 18 / 160

4/2018

113175421

XR14S/16S/18S/21S/26S/30S

Hooklift Multilift XR S

User Manual

Safety instructions and maintenance

Always follow the maintenance instructions and use only original Multilift spare parts.

See chapter

Maintenance.

Container

The demountable body can be a container, tank, gravel body, body for transporting

machinery etc. according to standards (e. g. DIN 30722, SFS 4417, SS 3021 or CHEM).

Check to be sure that the container is suitable for the load to be transported. Generally each

container has a model plate (ID) on which the length and permissible load are specified.

Before picking up the container, check that the hook height (H), tunnel height (T) and the

width (W) correspond with the XR hooklift dimensions and that the notches for the body

locks are in correct positions.

If there is even the slightest doubt of the container dimensions, measure them first in order

to prevent the equipment and the container from being damaged.

Gripping height (H), tunnel height (T) and width (W) of the container can vary from one

container to another. Note that they are country specific dimensions. If there is doubt about

the origin of the container, the tunnel height and width must be checked in order to ensure

that they are compatible with those of the Multilift equipment.

Country specific standard dimension table of the container is on the next page.

Содержание Hooklift Multilift XR S Series

































































































































































Результаты поиска

Содержание Hooklift Multilift XR S Series

Отзывы:

Похожие инструкции для Hooklift Multilift XR S Series

Бренды по названию

Популярные бренды

HIAB Hooklift Multilift XR S Series, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Hooklift Multilift XR S Series

Отзывы:

Похожие инструкции для Hooklift Multilift XR S Series

Бренды по названию

Популярные бренды