HIAB Hooklift Multilift XR S Series Скачать руководство пользователя страница 153

Страница: 153 / 160

153

4/2018

113175421

XR14S/16S/18S/21S/26S/30S

Hooklift Multilift XR S

Service Manual

• That adjustment of pressure relief valve settings and where applicable load

limiting valve settings is prohibited and will invalidate the warranty.

• Miscellaneous

………………………………………………………………………………………..

Owner’s Warranty

This Owner’s Warranty (hereinafter referred to as the ”Warranty”) applies to the products

listed on the delivery card (hereinafter referred to as the ”Products”) which accompanies

it. This Warranty is issued by the company that has sold the Product (hereinafter referred

to as the ”Seller”). The Warranty cannot be invoked against any other party than the Seller.

1 Warranty

1.1 The Seller warrants that the Products as listed in the delivery card, with the

exceptions stated below, are free from defects in material and manufacture. The

Warranty period is twenty-four (24) months from the date of delivery of the Products,

[but shall never exceed thirty (30) months from the date of delivery from factory].

• For demountable body systems the Warranty periods shall only apply in normal

usage of the Product, meaning in the maximum 4 000 platform changes per 24

months. In case the Product is used more excessively, the duration of the

Warranty period must be negotiated separately and if no agreement is entered

into the period in this paragraph applies.

Содержание Hooklift Multilift XR S Series

































































































































































Результаты поиска

Содержание Hooklift Multilift XR S Series

Отзывы:

Бренды по названию

Популярные бренды

HIAB Hooklift Multilift XR S Series, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание Hooklift Multilift XR S Series

Отзывы:

Бренды по названию

Популярные бренды