85
9.1.6 Config of Surveying
Use
◀▶
to select
Sequence
Users may choose to „survey first‟ or to „edit first‟ when
undertaking measurement under surveying mode.
Same point
Users may choose to check or not to check if there is a
duplicate of name in the list.
If choose to check, then the instrument will first search for
duplicated name in the file. If a duplicated name is found, a box
of „duplicated name found!‟ will appear on the screen. Press
„ENT‟ to overlay or „ESC‟ to quit and go back to the previous
page.
If choose not to check, the instrument will directly save
the coordinate of the point.
Edit point
Users may choose if to edit the information of points when
auto saving after measurement. If choose to edit „manually‟,
then the system will enter the page of „Information‟ when
pressing soft key „Save‟. If choose to edit „Auto‟, then the
system will save the measurement automatically with point
name added by one.
Record
It indicates whether to display the coordinate by sequence
„NEZ‟ or „ENZ‟ when surveying.