30
4.5 Loading and unloading of the pedestal
Unloading
Unload the pedestal by loosening the locking screw on the
pedestal with a screw driver and anti-clockwise turn the screw
around 180°.
Loading
Put the three fixed feet of the instrument into the
corresponding holes to make the instrument on the
pedestal
.
Turn
the clamping screw clockwise 180° to lock the instrument. Then
tighten the screw with a screw driver.
4.6 Adjusting eyepiece lens of the telescope and
aiming the target.
How to aim at a target (only for reference)
①
Aim at the bright sky with the telescope and adjust the
eyepiece to focus until a sharp image of the cross wire forms;
②
Aim at the target with the cross center in the coarse
sighting device on the top of the lens. your eyes should keep a
proper distance (about 200mm) away from the sighting device.
③
Obtain a sharp image of the target on the reticule with
the focusing screw. If optical parallax appears when angle of
view changed, the focus or the diopter of the eyepiece may be
unadjusted. For precision concerns, please adjust the eyepiece
focus to eliminate the optical parallax carefully.
4.7 Entering letters and numbers
You can enter the letters and numbers directly ,because our
total station is equipped with keyboard.
The page for „Setup Station‟
(Menu→1.Surveying→2.Station→Softkey F1[input] ) can
involve entering letters and numbers. Assume that the Pt. name
is „SUN1A‟ and STN is „ -123.456‟
The black box indicates that this column of information is
selected and numbers and letters will be entered into this column
only.
Setup station
PT.name
STN:
STE:
STZ:
B.S
Clear
Num
Enter