Configuration and Operations
LD900 Installation and Oper ations M anual
54
4.7.3.2
Receiver > Network > Wi-Fi
Options to configure Wi-Fi exist however, these are intended for use with potential future developments and
should be left
Off
.
4.7.4 Receiver > Antenna Voltage
The LD900 allows for GNSS Primary, GNSS Secondary, L-band and MF Antenna Voltages to be configured.
4.7.5 Receiver > Antenna Voltage >
(GNSS Pri’, GNSS Sec’, L-band)
To conf igure an antenna voltage, click on
Edit
and using the arrow keys select
Off
, or
On
(default) as required,
f ollowed by tick. Turning
Off
will result in a loss of tracking, as the power to the antenna will no longer be
provided when directly connected to the receiver. Then use the arrow keys to select
Apply
, right to select
Yes
and tick to apply the change:
4.7.6 Receiver > Update
Within the
Update
menu page, a
Find Update File
option is available.
This allows for a receiver update .zip file
to be located and uploaded to the system. Note that this should only be carried out under the direction of
VERIPOS support.
