LD900 Installation
LD900 Installation and Oper ations M anual
21
3.2 Rack Mount Formats
The LD900 can be supplied in one of two rack-mountable formats. The single format integrates a single LD900
with optional extras and easy access to configurable ports, while the dual format provides two LD900s within a
single enclosure. Both formats can be shipped with a VERIPOS PC capable of running the VERIPOS Quantum
sof tware if required.
3.2.1 Single Format Rack Mount
Alongside an LD900 the single format rack mount can also be provided with a Moxa 8 serial port expansion unit
and/or UHF receiver as required.
Single format rack mount (front)
The f ront facia of the single format rack mount (as shown in the above image) can be removed by unscrewing
the two f ront panel hex screws. This will provide access to the UHF module if included.
The diagram below illustrates the internal layout of the main components that are included in the single format
rack mount system and details how the user can access the various system connectors:
Single format rack mount (top)
LD900
IEC
AC
Input
DC
Power
Supply
DIN Rail
& DC Fuse
UHF
Antenna
AC
Power
Input &
Fuse
Removable
Front Panel
LD900
Front
Panel
LD900
Rear
Panel
Access to extended
ports 1 - 7
Single format rack mount (top)
