Hexagon Novatel Web UI v2, Руководство пользователя

Страница: 45 / 49

Chapter 3 Function Tabs
Use the Heading Offset and Pitch Offset fields to enter offset values for heading and pitch. The offset values are
used in the HEADING2 log and GPHDT log. Refer to the HEADINGOFFSET command for more information
about these parameters.
Data Rates
Use the Observation-Rate and Position-Rate fields to the select the rate at which ALIGN information is provided.
3.8 SPAN Tab
The SPAN Tab is used to view the current status and configure the IMU used, the rotation and translation for a
primary antenna as well as a secondary (if required) and set an alignment mode.
Not all SPAN functionality is available using the Web UI. Refer to SPAN Operation section for
instructions on using the command line to configure SPAN functionality not covered in this topic.
3.8.1 SPAN Status Window
Use the SPAN Status Window to view the current status including position, velocity and attitude of the IMU.
Web UI User Manual v0B 45