Hexagon NovAtel MarinePak7, Руководство пользователя

Страница: 91 / 121

Chapter 4 Web User Interface
Port Name ICOM1,
ICOM2,
ICOM3 If adding a log to an ICOM port, select the ICOM port to configure.
If editing, this field displays the name of the ICOM port.
Message
ID Message ID
of the log Select the Message ID of the log to be output on this COM port.
The logs can be NMEA or INS logs. For the list of the logs available, Table 8:
NMEA Message IDs on page 87 and Table 9: INS Message IDs on page 88.
Period
(Hz) 1, 2, 5, 10,
20, 50, 100,
200 Enter the frequency, in Hertz, at which the log is output.
Availability of the 20 Hz, 50 Hz, 100 Hz and 200 Hz messages is
Receiver Model dependent.
50 Hz, 100 Hz and 200 Hz message are available only for INS
output messages.
4.10 Logging
The Logging tab provides information about the internal data storage and the logs configured to be
stored.
4.10.1 Global Logging Status
The Global Logging Status tile controls whether logging to the MarinePak7 is enabled or disabled.
Setting the Global Logging Status to OFF disables user selected logs from being stored.
Setting the Global Logging Status to ON enables data logging. The MarinePak7 will log all messages
listed in the Log list window.
4.10.2 Usage Details
This tile provides the current internal memory used and the maximum capacity of the internal data
storage allocated for data logging.
MarinePak7 User Manual 2 91