HEX-BEAM SP7IDX MARK IV HD, Инструкция по эксплуатации

Страница: 32 / 68

32
Step 4.
The assembly and tightening of lines.
We start with Kevlar line with S-hook should be fixed in the center post in closed loop.
After 6 lines have been fixed in the center post, fasten lines around the perimeter - one
to the other - in clockwise direction. The holders for electric components should be
faced in inward direction. Perform this action very carefully to avoid the eye injury. The
lines put the poles under tension in inward direction! And that's their purpose! They
hold the whole structure together, not the electric components.