a.
From the RMI, add the HPE SIM management station as an SNMP target.
b.
If the library IP address is in an HPE SIM automatic discovery IP address list, the SIM management
station will detect the library at the next scheduled scan.
2.
To configure HPE SIM for manual discovery:
a.
In the HPE SIM toolbar, click
Options > Discovery
.
b.
Click the
Manual
tab.
c.
Enter the library IP address or system name.
SIM 5.1 will automatically detect the system type and product name.
To identify the library manually with SIM 5.0 and older:
1.
In the HPE SIM
System and Event Collections
pane, click
Systems by Type
.
2.
In the
Systems by Type
pane, click
All systems
.
3.
Click the link with the IP address or name of the library.
4.
Click the
Tools & Links
tab.
5.
Click
Edit System Properties
.
6.
Set
System Type
to
Tape Library
.
7.
Enter the
Product Model
of your library.
8.
Click
OK
.
The Configuration > Password page
Use the
Configuration > Password
page to change the administrator password for the RMI and OCP.
NOTE:
The administrator password must be set from the OCP before you can access administrator functionality in
the RMI.
Figure 48: Configuration > Password page
You can change the:
• Password — The password is exactly eight numbers, each from 0 to 9.
• Password Time Out — The number of minutes that the current administrator login session will remain
logged in without user interaction. The default is 30 minutes.
The Configuration > Password page
85
