• Data Compression — Yes, if the host has hardware compression turned on for the drive.
• Interface Type — SCSI, Fibre Channel, or SAS
• WWide Node Name (FC drive only) — world-wide unique number for the drive. The library assigns
WWNames to the drive bays. When a tape drive is replaced, the WWName is reassigned to the
replacement drive.
• Port information for each configured port (FC drive only) Port information (FC drive only)
◦ WWide Port Name — world-wide unique identifier for the port. The WW Node and Port Name will be
slightly different.
◦ Port Type — the current setting of the drive port. Direct connected devices are typically Loop. Devices
connected to a switch are typically Fabric.
◦ Speed
The Identity > Network page
The
Identity > Network
page displays information about the network configuration.
Figure 31: Identity > Network page
You can see, but not modify:
The Identity > Network page
65
