◦ Mailslot
◦ Left magazine
◦ Right magazine
◦ Drive 1
◦ Drive 2 (if two drives are present)
• To view the inventory of a magazine, press
Enter
when the OCP displays
Left
or
Right Magazine
.
The OCP will display the contents of the lowest numbered slot in the magazine. The display will show the
tape bar code number,
Full
, or
Empty
.
1.
Use
Previous
or
Next
to scroll through the remaining slots in the magazine. Press
Cancel
to choose
another inventory location.
• To view the inventory of a tape drive, press
Previous
or
Next
until the screen displays
Drive 1
, or
Drive 2
.
The display will show the tape bar code number,
Full
, or
Empty
. Press Enter to view the source of the
tape loaded in the drive. For example,
Drive 1 Tape Source = Slot 2
, indicates that the tape in Drive 1
was loaded from slot 2.
Viewing library information (Status/Information> Library Information)
Procedure
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Status/Information
. Press
Enter
to select.
2.
Press
Previous
or
Next
until the screen displays
Library Information
. Press
Enter
to select.
3.
By using
Previous
or
Next
, you can select from the following information screens:
• Library Time
• Firmware rev.
• Product ID
• Serial number
• SCSI ID and LUN (SCSI devices only)
• Slots and Mailslots
• Master drive
• Odometer
• Power On Time
• WWide Node Name for the FC node to which the Library is connected. (Fibre Channel only)
Viewing library information (Status/Information> Library Information)
101
