Remove the primary riser blank
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
either riser blank or the riser cage is installed.
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
on page 23.
2.
Disconnect all peripheral cables from the server.
3. Remove the server from the chassis
on page 28.
5. Remove the secondary riser cage
on page 33.
6.
Remove the primary riser blank.
Install the primary riser blank
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1.
Install the primary riser blank.
Operations
35
