Hewlett Packard Enterprise OfficeConnect 1850 2XGT, Руководство по установке и началу работы, Страница: 44 / 56

Specifications
Twisted-Pair Cable/Connector Pin-Outs
A-8
Straight-through Twisted-Pair Cable for 10/100 Mbps Network Connections
Because of the Auto-MDIX operation of the 10/100 ports on the switch, for all network connections, to PCs,
servers or other end nodes, or to hubs or other switches, you can use straight-through cables.
If any of these ports are given a fixed configuration, for example 100 Mbps/Full Duplex, the ports operate as
MDI-X ports, and straight-through cables must be then used for connections to PC NICs and other MDI ports.
Cable Diagram
NOTE:
Pins 1 and 2 on connector “A” must be wired as a twisted pair to pins 1 and 2 on connector “B”.
Pins 3 and 6 on connector “A” must be wired as a twisted pair to pins 3 and 6 on connector “B”.
Pins 4, 5, 7, and 8 are not used in this application, although they may be wired in the cable.