Hewlett Packard Enterprise HPE ProLiant XL230k Gen10, Руководство пользователя

Страница: 29 / 82

10. Install the air baffle.
11. Close the front bracket.
12. Install the access panel.
13. Install the server into the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server.
Memory options
IMPORTANT: This server does not support mixing LRDIMMs and RDIMMs. Attempting to mix any
combination of these DIMMs can cause the server to halt during BIOS initialization. All memory installed
in the server must be of the same type.
DIMM population information
For specific DIMM population information, see the DIMM population guidelines on the Hewlett Packard
Enterprise website (
http://www.hpe.com/docs/memory-population-rules ).
DIMM-processor compatibility
The installed processor determines the type of DIMM that is supported in the server:
• First Generation Intel Xeon Scalable Processors support DDR4-2666 DIMMs.
• Second Generation Intel Xeon Scalable Processors support DDR4-2933 DIMMs.
Mixing DIMM types is not supported. Install only the supported DDR4-2666 or DDR4-2933 DIMMs in the
server.
Hardware options installation 29