Hewlett Packard Enterprise HPE ProLiant DL580 Gen10, Руководство пользователя

Страница: 128 / 197

Mixing DIMM types is not supported. Install only the supported DDR4-2666 or DDR4-2933 DIMMs in the server.
HPE SmartMemory speed information
For more information about memory speed information, see the Hewlett Packard Enterprise website ( https://
www.hpe.com/docs/memory-speed-table).
Installing a DIMM
For information about memory support, configurations, or population guidelines, see
Memory options.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• The components included with the hardware option kit
• A T-10 Torx screwdriver might be needed to unlock the access panel.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extending the server from the rack).
• Remove the server from the rack ( Removing the server from the rack).
4. Remove the access panel ( Removing the access panel).
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the
server in this manner results in improper airflow and improper cooling that can lead to thermal damage.
5. Remove the primary PCIe riser cage ( Removing a PCIe riser cage).
6. If installed, remove the butterfly riser cage ( Removing a PCIe riser cage).
7. Remove the air baffle ( Removing the air baffle).
8.
To access the DIMM slots for processors 1 and 2, remove the processor mezzanine tray (
Removing the processor
mezzanine tray).
9. Open the DIMM slot latches.
10. Install the DIMM.
Hardware options installation
128