Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Страница: 96 / 179

6. Remove the fan cage.
7. Disconnect the energy pack cable, and then remove the energy pack.
To replace the component, reverse the removal procedure.
Removing and replacing a Smart Array type-a modular controller
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack.
4. Remove the access panel.
5. Do one of the following:
• Remove the air baffle.
•
Remove the 4 LFF midplane cage.
6. Disconnect the SAS cables.
7. Remove the modular controller.
Removal and replacement procedures
96