Partial chassis view (empty)
Bezel attaches to hubcaps
Left ear panel
Ear cover
Hubcap
Hubcap
Right ear
Ear cover
Slot nib
(fitted over ear covers)
Figure 38 Partial exploded view showing alignment of bezel components
See also, the
"Attach the enclosure bezel" on page
topic, which provides a simple procedure for attaching the bezel to
the hubcaps fitted over ear covers. The bezel slot nibs fit through the aligned slots in the hubcaps and ear covers.
Left hubcap
backside view
Right hubcap
backside view
Figure 39 Details showing backside of bezel fitted to hubcaps
The details above are simplified for clarity. They show the slot locations at the base of each hubcap through which the
bezel attaches. Only the hubcaps are shown. The ear covers over which they attach are factory installed to protect the
ears. See also the exploded view above, which shows the hubcaps aligned to fit over the ear covers. The topic about
provides additional details about the left and right hubcaps.
Enclosure bezel removal
TIP To remove the bezel from the enclosure front panel, reverse the order of the steps provided in the attachment
procedure. See also
"Attach the enclosure bezel" on page
.
68
Appendix A
LED descriptions