Chapter 2
Components
17
The figure below shows two host interface ports configured with 10GBase-T iSCSI connectors.
= 10GBase-T iSCSI LEDs
1
3
8
2
4
5
6
7
1
Host ports: host connection or replication
5
CLI port (serial: service only)
2
Manufacturing port 3 (service only)
6
CLI port (USB–Type B)
3
Manufacturing port 2 (service only)
7
Network management port (RJ45)
4
Manufacturing port 1 (service only)
8
SAS expansion port (SFF-8644)
Figure 12 MSA 1060 controller module face plate (10GBase-T iSCSI)
This figure below shows two host interface ports configured with 12Gb/s mini-SAS HD (SFF-8644) connectors.
1
3
8
2
4
5
6
7
= SAS LEDs
1
Host ports: host connection
5
CLI port (serial: service only)
2
Manufacturing port 3 (service only)
6
CLI port (USB–Type B)
3
Manufacturing port 2 (service only)
7
Network management port (RJ45)
4
Manufacturing port 1 (service only)
8
SAS expansion port (SFF-8644)
Figure 13 MSA 1060 controller module face plate (12Gb mini-SAS HD)
Disk enclosures
Disk enclosure expansion modules attach to controller modules via the mini-SAS HD expansion port, allowing addition
of disks to the storage system. Controller enclosures support attachment of 12Gb disk enclosures using 2U12 and 2U24
form factors. The 2U12 chassis supports 12 LFF 3.5" disks and the 2U24 chassis supports 24 SFF 2.5" disks. The rear panel
view of a disk enclosure representing both the 2U12 and the 2U24 is shown in the following figure.