Chapter 2
Components
13
6
5
2
3
4
1
5
9
Notes
:
Left ear
Right ear
Integers on disks indicate drive slot numbering sequence.
The enlarged detail view at left shows LED icons from the left ear that correspond to the chassis LEDs.
Ear cover icons for LEDs
1
2
6
10
3
7
11
4
8
12
1
Enclosure ID LED
4
Unit Identification (UID) LED
2
System Power LED
5
Disk drive Fault/UID LED
3
Module Fault LED
6
Disk drive Online/Activity LED
Figure 6 12-drive controller or expansion enclosure: front panel
NOTE The hubcaps/ear covers must be attached to the left and right ear flanges on the enclosure front panel to
protect the front status panel and circuitry. Optionally, the bezel can also be attached between the two hubcaps.
Disks used in storage enclosures
Supported disk types are described below. For information about creating disk groups and adding spares using these
different disk types, see the Storage Management Guide.
MSA 2060 enclosures
Enclosures support LFF Midline SAS, SFF Enterprise SAS, and LFF/SFF SSD disks. They also support LFF Midline SAS
and SFF Enterprise and LFF/SFF SSD self-encrypting disks that work with the full disk encryption (FDE) feature.
MSA 2062 enclosures
These enclosures support the same disk types supported by MSA 2060 enclosures. A notable configuration exception is
that for these enclosures, two SSDs are pre-installed. One SSD is installed in drive slot 1 and the other SSD is installed in
drive slot 2.
MSA 1060 enclosures
Controller enclosures support SFF Enterprise SAS disks and SFF SSDs. Disk enclosures support LFF/SFF Midline SAS disk,
LFF/SFF Enterprise SAS disks, and LFF/SFF SSDs.
NOTE Disk modules used in MSA 1060/2060/2062 enclosures:
l
In addition to the front views of SFF and LFF disk modules shown above, see
for
pictorial views.
l
Storage enclosures may or may not ship with disks pre-installed, depending on order configuration terms.
l
For information about installing or replacing disks, see
HPE MSA 1060/2060/2062 Drive Replacement Instructions
.