26
LED description
LED Status
Description
GE port
LEDs
Green
LED
Steady green
A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at 1000 Mbps.
Off
No 1000 Mbps link is present.
Yellow
LED
Steady yellow
A 10/100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at 10/100 Mbps
Off
No 10/100 Mbps link is present.
System status LED
(SYS)
Steady green
The SDRAM is performing self-test.
Flashing green (8 Hz)
The system software image is being copied and
decompressed.
Flashing green (1 Hz)
Comware has started with the configuration file and
the router has booted up.
Flashing yellow (1 Hz)
The SDRAM has failed the self-test.
Flashing yellow (8 Hz)
The extended segment does not exist.
Steady yellow
The system software image does not exist.
Off
No power input, or exceptions have occurred.
VPN status LED (VPN)
Steady on
A minimum of one IPSec VPN tunnel is present.
Off
No IPSec VPN tunnel is present.
Combo interface LED
Steady green
A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at 1000 Mbps.
Steady yellow
A 10/100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at 10/100 Mbps.
Off
No link is present.
PoE LED
Steady green
PoE is operating correctly.
Flashing green at 8 Hz
PoE has failed.
Off
PoE is disabled.
SD
card LED
Steady green
An
SD
card is present and has passed the test.
Flashing green
A write operation is being performed.
Off
No
SD
card is present or
SD
card installation has
failed.