Hewlett Packard Enterprise FlexFabric 5940 Series, Руководство по настройке

Страница: 69 / 123

63
Configuring nesting
Nesting adds a VLAN tag to the matching packets to allow the VLAN-tagged packets to pass through
the corresponding VLAN. For example, you can add an outer VLAN tag to packets from a customer
network to a service provider network. This allows the packets to pass through the service provider
network by carrying a VLAN tag assigned by the service provider.
Configuration procedure
To configure nesting:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Create a traffic class and
enter traffic class view.
traffic classifier classifier-name
[
operator
{
and
|
or
} ]
By default, no traffic classes
exist.
3.
Configure a match
criterion.
if-match match-criteria
By default, no match criterion
is configured for a traffic class.
For more information about the
match criteria, see the
if-match
command in
ACL and
QoS Command Reference
.
4.
Return to system view.
quit
N/A
5.
Create a traffic behavior
and enter traffic behavior
view.
traffic behavior behavior-name
By default, no traffic behaviors
exist.
6.
Configure a VLAN tag
adding action.
nest top-most vlan vlan-id
By default, no VLAN tag
adding action is configured for
a traffic behavior.
7.
Return to system view.
quit
N/A
8.
Create a QoS policy and
enter QoS policy view.
qos policy policy-name
By default, no QoS policies
exist.
9.
Associate the traffic class
with the traffic behavior in
the QoS policy.
classifier classifier-name behavior
behavior-name
[
insert-before
before-classifier-name
]
By default, a traffic class is not
associated with a traffic
behavior.
10.
Return to system view.
quit
N/A
11.
Apply the QoS policy.
•
Applying the QoS policy to an
interface
•
Applying the QoS policy to VLANs
•
Applying the QoS policy globally
•
Applying the QoS policy to a
control plane
Choose one of the application
destinations as needed.
By default, no QoS policy is
applied.
Configuration example
Network requirements
As shown in Figure 20 :