Hewlett Packard Enterprise Apollo 4200 Gen10, Руководство пользователя

Страница: 111 / 159

5. Connect the power cord to the power source.
6. Be sure that the power supply LED is green.
HPE Smart Storage Battery
The HPE Smart Storage Battery supports the following devices:
• HPE Smart Array SR controllers
• HPE Smart Array MR controllers
A single 96W battery can support up to 24 devices.
After the battery is installed, it might take up to two hours to charge. Controller features requiring backup power are not re-
enabled until the battery is capable of supporting the backup power.
This server supports the 96W HPE Smart Storage Battery with the 145mm cable.
Installing the HPE Smart Storage Battery
CAUTION: In systems that use external data storage, be sure that the system is the first unit to be powered down and
the last to be powered back up. Taking this precaution ensures that the system does not erroneously mark the external
drives as failed when the system is powered up.
NOTE: System ROM and firmware messages might display "energy pack" in place of "Smart Storage Battery." Energy pack
refers to both HPE Smart Storage batteries and HPE Smart Storage Hybrid capacitors.
Procedure
1.
Power down the system (
Power down the system).
2.
Remove all power:
Hardware options installation
111