9
DK ASSIGNMENTS
Check the following list before turning on power to the
receiver.
1. Be sure the motion toggle switches are in their
Off (neutral) positions.
2. Be sure there are fully charged batteries in the
transmitter. Refer to "Changing the Battery" on
page 13.
HOLDING THE TRANSMITTER
Hold the transmitter with the control panel facing you.
Be sure that you are able to easily read any text and
understand operation symbols.
DK1
S1
DK2
DK7
DK8
S4
S5
DK9
DK10
DK5
DK6
S3
S2
DK3
DK4
S 0
S
to
p
HH-M-MFSHL TS5
S
to
p
DK1
DK2
DK3
DK4
DK5
DK6
DK7
DK8
DK10
S1
S2
S3
S4
S5
S6
DK11
DK12
HH-M-MFSHL TS6P
DK9
S 0
S
to
p
S
to
p
DK1
DK2
DK3
DK4
DK5
DK6
DK7
DK8
DK9
DK10
DK11
DK12
DK13
DK14
S1
S2
S3
S4
S5
S6
S7
HH-L-MFSHL TS7P
S
to
p
S
to
p
S 0
TEST PROCEDURES
WARNING:
FAILURE TO FOLLOW
INSTRUCTIONS could result in personal
injury and/or damage to equipment. Read and
understand the safety instructions in all
manuals provided.
Testing or service must be performed by
authorized personnel only.
There must be no load on the crane/machine.
Clear the crane/machine operating area of
obstructions.
WARNING:
FAILURE TO FOLLOW
INSTRUCTIONS could result in personal
injury and/or damage to equipment. Always
hold the transmitter in the proper orientation.
Holding the transmitter improperly while
operating the crane/machine could result in
unexpected crane/machine response.
PRELIMINAR
Y COPY
