8
CONNECT ELECTRICAL WIRING
Connect all remaining wires (power supply, engine
start-stop, etc.) according to the wiring diagram of the
crane/machine and the radio remote control.
Quick-Disconnect Plugs
Hetronic offers a plug receptacle kit, which contains
two 12-pin quick-disconnect plugs with wedges and 28
contacts. The installer must wire the female
quick-disconnect plugs and terminate them to the
crane/machine controls.
Quick-Disconnect Plug Wire Terminations
Refer to the wiring diagram on this page, which is also
provided with your system.
The male and female connector module pins are
labeled. The 12 pin connectors use numeric
numbering, i.e. 1, 2, 3, 4, etc.
Receiver Wiring Diagram and Pin Layout
Each Hetronic radio remote control system is delivered
with two alkaline batteries. These are inserted in the
battery compartment located in the handle of the
transmitter.
Please note that the actual configuration of each radio
remote control system may vary from the illustrations
shown in this manual. Refer to the technical
documentation provided with each system for the
actual design, layout and components.
FREQUENCY AND ADDRESS SETTINGS
Each Hetronic radio remote control system contains a
radio frequency (RF) unit. Each system consists of a
transmitter RF unit and a receiver RF unit.
Both Frequency and Address settings are uploaded to
the system using the new H-Link wireless technology.
These are preset at the factory and are password
protected. Refer to the HH-MFSHL H-Link
Programming Manual for more details.
IMPORTANT:
The Address and Frequency settings for
both the transmitter and receiver must match;
otherwise, the system will not function.
RRaaddiioo RReem
moottee RReecceeiivveerr
M
MFFSSH
HLL--D
DCC1166--PPW
WM
M
++11
22 //
2244
VVDD
CC
CCoonnttrrooll
CCiirrccuuiitt
FF11 1100AA
KK00
GGNN
DD
((--))
PPWW
MM
11
PPWW
MM
22
KK33
KK44
KK55
KK66
KK77
KK88
KK99
KK11
00
MM
CC
Inputs
AA
BB
KK11
11
KK11
22
KK11
33
KK11
44
UUBB
22
KK11
KK22
KK11
55
KK11
66
IINN
11
IINN
22
w
ww
ww
w..hheettrroonniicc..ccoom
m
BB77
BB66
BB44
BB55
BB33
AA
66
AA
77
AA
55
AA
88
AA
44
AA
99
AA
33
AA
1100
((A
A))
AA
22
AA
1111
AA
11
AA
1122
BB11
00
BB11
22
BB11
BB11
11
BB22
BB99
BB88
(A)
77
88
99
1100
1111
1122
66
55
44
33
22
11
11
22
33
44
55
66
1122
1111
1100
99
88
77
A
Addddrreessss
LLeeaarrnn
HAND-HELD TRANSMITTERS
CAUTION:
AVOID INJURY OR DAMAGE -
Operating the transmitter without its antenna
could destroy the final stage of the RF
module. DO NOT attempt to change the
Hetronic pre-set frequency or the 20-bit
address. Personal injury and property
damage could result from transmission
interference and may void the warranty.
PRELIMINAR
Y COPY
