HESCH HE 5712 Compact, Руководство по эксплуатации

Страница: 27 / 33

HE 5712 Operating Instructions
# 372048 | Version 1.4 27
6.6 Reset Default Settings
Note!
If a password has been assigned, it must be entered during reset. After
the reset, the password is 0. A new password must be assigned. (
see
chapter 5.2 Read out and set password ).
1. Switch on the device while keeping both keys UP and DOWN
pressed for 5 seconds.
EEP
2. EEP
is displayed.
cod
3. When the 5 seconds are up, cod is displayed to enter the
password.
4. Press the ENTER key to start the password entry.
5. After entering and acknowledging the last digit of the
password, the control starts with default parameters (
see 6.2
Parameter Table)
6. If no password has been assigned, the control starts
automatically after 5 seconds with default parameters (
see
6.2 Parameter Table ).