HE 5411 Operating Instructions
#340411 | version 1.7
5
1
Legal Provisions
Manufacturer
HESCH Industrie-Elektronik GmbH, Boschstraße 8, 31535 NEUSTADT, GERMANY
Intended use
The HE 5411 differential pressure transducer is a universal pressure transducer,
mainly used in dedusting technology. It can also be used in the measurement of
overpressure in clean rooms.
The device can be operated within the operating and environmental conditions
approved in these operating instructions without impairing its safety.
The manufacturer is not liable for improper use and any resulting personal injury or
material damage; the risk is borne solely by the user. Failure to comply with the above
criteria for intended use will result in the expiry of the warranty and liability for the
device.
Personnel qualification
All work on the differential pressure transducer may only be carried out by qualified electricians
with sufficient knowledge in the field of electrical engineering.
Device Safety
The device has been constructed and tested in accordance with VDE 0411 / EN 61010-1 and
has left the factory in perfect safety condition. To maintain this condition and ensure safe
operation, the user must observe the notes and warnings described in this manual.
Declaration of conformity
The valid declaration of conformity can be found on the internet on
