14
HE 5411 Operating Instructions
#340411 | version 1.7
4.2
Opening the device
The opening and closing is without screws by means of hinge technology. A flat-tip screwdriver
is needed to open the device. Apply the screwdriver to the position intended for this on the
housing lid, in order to lift up the hinge. Open the case cover to the left up to an angle of 105°.
Optionally, the housing lid can be closed with 4 additional screws
(see chapter 11
in order to protect it from unauthorised access.
The screwless hinge closure is recommended for rapid service access.
Open the housing lid to the left. (The illustration does not show the HE 5411, but one with
a structurally identical housing. The opening principle is identical.)
4.3
Mounting the device
4 screws are required to fasten the device to the wall. (Not included in the scope of delivery!)
Base of the housing
Alternative: Fastening to the wall with wall brackets. (
see chapter 11
