Hesai XT32M2X страница 8 Скачать руководство пользователя | Manualshive

Страница: 8 / 86

background image

-

6

-

■ Personnel

Recommended Operator Qualifications

The product should be operated by professionals with engineering backgrounds or experience in operating optical, electrical, and mechanical
instruments. Please follow the instructions in this manual when operating the product and contact Hesai technical support if needed.

Medical Device Interference

·

Some components in the product can emit electromagnetic fields. If the product operators or other people in the nearby environment wear
medical devices (such as cochlear implants, heart pacemakers, and defibrillators), make sure to consult the physicians and medical device
manufacturers for medical advice, such as determining whether it is safe to work near the product.

·

If you suspect that the product is interfering with your medical device, stop using the product immediately.

■ Installation and Operation

Power Supply

·

You are recommended to use only the cables and power adapters provided by Hesai Technology.

·

If you are to design, configure, or select the power supply system (including cables) for the product, make sure to comply with the electrical
specifications in the product's user manual (refer to the

Specifications

section and the

Power Supply Requirements

section); for technical

support, please contact Hesai Technology. Do NOT use off-spec or damaged cables or adapters.

Electrical Interface

·

Before powering on the product, make sure the electrical interfaces are dry and clean. Do NOT power on the product in a humid
environment.

·

Please check the

Interfaces

section in the product's user manual and strictly follow the instructions on plugging/unplugging the connector.

If abnormalities already exist (such as bent pins, broken cables, and loose screws), stop using the product and contact Hesai technical
support.

·

To prevent breakdown, turn off the power source before connection and disconnection.

«
...
6
7
8
9
10
...
»

Содержание XT32M2X























































































Отзывы:

Нет отзывов

Похожие инструкции для XT32M2X

Бренд: IDS Страницы: 44

Бренд: Sangean Страницы: 27

Бренд: SOUNDMASTER Страницы: 46

Hello Kitty HK78

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 2

Rosemount 5600 Series

Бренд: Emerson Страницы: 128

3308A Rosemount 3308 Series

Бренд: Emerson Страницы: 198

Rosemount 3308A

Бренд: Emerson Страницы: 226

Бренд: Navico Страницы: 34

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 4

Бренд: Garmin Страницы: 36

Sure Cross MultiHop

Бренд: Banner Страницы: 2

Бренд: Sangean Страницы: 9

Бренд: Federal Signal Corporation Страницы: 12

Trackit AINA PTT Voice Responder

Бренд: Command Alcon Страницы: 7

Бренд: Elkron Страницы: 44

Бренд: nanoradar Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды