Herutu TW-510T, Инструкция по эксплуатации

Страница: 17 / 32

11
6.To change the ID setting
6.To change the ID setting
6-1.Displaying method of ID
The ID is normally addressed in decimal notation, however, for setting, convert it into
binary notation and set it with the DIP Switch.
The following figure shows the case where each bit of DIP switch is set in decimal
notation.
Example of setting
：ＩＤ ５
Bit Bit weight Decimal number
１ ２ ０ ＝ １
２ ２ １ ＝ ２
３ ２ ２ ＝ ４
４ ２ ３ ＝ ８
５ ２ ４ ＝ １６
６ ２ ５ ＝ ３２
７ ２ ６ ＝ ６４ A dd “ON bit”.
８ ２ ７ ＝ １２８ e.g. ：If “１” and “３” are ON,１＋４＝５
The examples of ID setting are shown below.
ＩＤ ０ １ ２ ３ ４
・・・・・・・・
ＩＤ ５ ６ ・・・・・・・・ ２５４ ２５５
The 8-bit ID includes 256-type ranging from 0 to 255.
ON
8 7 6 5 4 3 2 1