18
Applications
6-1. Transmitter
When Controller [21D-429C] is not used, use our wireless modem [TELEMATE III] as the
modem for transmitter.
Also, when RS-485 communication (wired communication) is conducted, use the
RS232C/485 signal converter modem [MODEL485H] as a modem for transmission side.
For the detail of [TELEMATE III] and [MODEL485H], see the attached operation
manual.
The RC-232C signal sent from the computer is transmitted via the wireless modem (or
wired modem) to the Display. Once the data corresponding to the specified
communication format is received, the Display displays the data. Thoroughly understand
the Communication specifications/Communication format before use.
For the setting methods of Communication channel/Equipment No., see
”4-3. Setting the
Communication channel
” and “4-4. Setting the Equipment No.”
6-2. Communication specifications
Items
Descriptions
Communication
method
Unidirectional communication
Synchro system
Asynchronous
Communication speed
1200bps
Start bit
1 bit
Data length
8 bits
Stop bit
2 bits
Parity
None
Code
ASCII
