HERO D23, Руководство пользователя

Страница: 6 / 52

MANL-00005-A - D Series Rotary Dispensers.docx
6
G ROUNDING INSTRUCTIONS

This product should be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for the electric current. This product is equipped
with a cord having a grounding wire with an appropriate grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded in accordance with all local codes and
ordinances.

WARNING - Improper installation of the grounding plug can result in a risk of electric shock. When
repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either
flat blade terminal. The wire with insulation having an outer surface that is green with or without
yellow stripes is the grounding wire.

Check with a qualified electrician or serviceman if the grounding instructions are not completely
understood, or if in doubt as to whether the product is properly grounded. Do not modify the plug
provided; if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug similar to the plug
illustrated. Only connect the product to an outlet having the same configuration as the plug. Do not
use an adapter with this product.

Use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle that will
accept the plug on the product. Make sure that your extension cord is in good condition. When
using an extension cord, be sure to use one heavy enough to carry the current your product will
draw. For lengths less than 50 feet, No. 16 AWG extension cords should be used. An undersized
cord will cause a drop in line voltage resulting in loss of power and overheating.