background image

 

MANL-00005-A - D Series Rotary Dispensers.docx

 

 

4

 

WARRANTY 

HERO offers a two year parts warranty and one year labor warranty on all of its manual dispensers. The 

warranty entitles the owner to parts replacement at no charge. The parts warranty is valid for any 

necessary replacement, whether caused by material, workmanship defect or simple wear, except as noted 

below. 

 

Electric motors, timers and pneumatic motors warranted for twelve (12) months only. 

 

The warranty is applicable to the  original owner only  and is non-transferable. The equipment must be 

operated and maintained in accordance with all instructions,  precautions  and warnings contained in the 

product manual. For the purpose of this warranty, damage caused by accident, abuse, improper cleaning or 

lack thereof, or improper operation,  is not  covered. Cleaning and general maintenance is the responsibility 

of the owner/operator and is not covered by the warranty.

 

HERO’s liability is limited to the replacement of parts found to be defective or worn and does not include 

damage or other expenses of any kind incurred in connection with the purchase and use of the product.

 

All parts required for warranty service are invoiced to the client, with credit provided upon submission of a 

valid warranty claim. A valid claim lists the  model number, serial number, date of installation, lists all parts 

used and provides for parts installation charges. 
Major parts replacement may require the return of defective parts. If uncertain, contact HERO for further 

instruction. All returns must be authorized and no return will be accepted without  a Return Merchandise 

Authorization  (RMA) number. 
All warranty work requests or claims must be directed to HERO Customer Service at any of the following: 

 

Canadian Mail: 

720 Eaton Way • Delta, BC • Canada • V3M 6J9

 

US Mail: P.O. Box 75 

• 

Custer, WA 

 USA 

• 

98240-0075 

Phone: 604-522-6543 

Fax: 604-522-8735 

Email: 

[email protected] 

Help Desk: 800-494-4376, option 1 

 

Parts warranty includes shipping via a carrier and service type compatible with the nature of the equipment 

failure and as determined by an authorized HERO Customer Service Representative.  When expedited 

delivery is not warranted, the customer may request and pay for the difference between such service and 

HERO’s standard shipping method. 
The labor warranty on units covers on-site and  travel labor to and  from the customer’s  location.  An 

authorized  HERO Customer Service Representative must approve  all warranty repairs before any work is 

performed. 

 
 

 

 

Содержание D23





















































Отзывы: