Hermes Yachting Alice Bavaria Cruiser 51 2016, Руководство по эксплуатации

Страница: 20 / 25

Σελίδα
20
από
25
ΕΧTERIOR
Engine Control Panel
An engine control unit (ECU), also commonly called an engine control
module (ECM), is a type of electronic control unit that controls a series
of actuators on an internal combustion engine to ensure optimal engine performance.
- Make sure engine is in
neutral.
- Press the ignition
switch then press the start
button until you hear the
engine running.
- When the engine is
running check to make sure
you have water coming out of
the exhaust.
-
- To stop the engine press the stop button until the engine has stopped.
- An alarm will sound after you stop the engine. Press the ignition once more to
turn off the ignition
Thruster Controller
Thrusters are designed with propellers facing in a sideways direction so when they are
turned on,
they push the bow or stern of a boat sideways through the water , in
either direction. If only one thruster is used, for example in the bow, then the boat will
also turn and change orientation.
1. Turn main power switch for the bow thruster on. (Always turn off the main power
switch when not onboard.)
2. Please take some time to exercise thruster usage in open
water to avoid damages to your boat.
3. Turn the control panel on by pushing both "ON" buttons on
the original Side-Power panel simultaneously. If another type
of control is installed, engage the On/Off switch for the bow
thruster.
4. Turn the bow in the desired direction by pushing the red
button for port movement or the green button for starboard
movement. If you have a joystick control, move it in the