Parts Included
Tools Required
HermanMiller
Canvas Channel Surface Attached
Laminate Screen (FT360, FT361, FG360,
FG361) Installation and Disassembly for
Recycling Instructions
How to assemble your Surface
Attached Laminate Screen
Screen
Cable Trough
RH Screen Bracket
Pan Head Machine Screw
Torx Sheet Metal Screw
LH Screen Bracket
Center Screen Bracket
Safety Glasses
Phillips Bit
Torx Bit
Power Driver
Assembly Instructions:
Step 1
1.1 Attach LH & RH Screen Brackets and Center screen bracket to
Screen with pan head screws.
1.2 If screen is to be attached to end of table where a wall attached leg is
installed, switch middle bracket with end screen brackets. This will give
clearence between bracket and leg.
1.3 If Cable Trough is to be installed onto screen, place screen flat on
clean surface. Position brackets onto screen. Place Cable Trough over
brackets. Install pan head screws.
Cable Trough
Pan Head
Machine Screw
Center Screen
Bracket
LH Screen
Bracket
RH Screen
Bracket
Assembly Instructions
1
HermanMiller
1BLY01 rev A
