HermanMiller
Ergon 3
®
Chair
Adjustment Guide
1
Seating that
performs for you.
HermanMiller
Ergon 3
®
Chair
Tilt Tension:
Knob under seat on front of chair
To increase:
Turn knob to the left.
To decrease:
Turn knob to the right.
Depending on the desired tilt resistance, a number of turns may be required.
Set the tilt tension to control the resistance you feel when reclining.
Seat Height:
Paddle-shaped lever on right side
To raise:
Take your weight off chair, lift lever up.
To lower:
Life lever up while seated.
At the proper height, your feet should rest flat on the floor.
Forward Tilt:
Small lever on right front
Tilt Lock:
Lever on right side
For chairs with knee tilt only.
For chairs with knee
tilt/forward angle.
To lock in upright position:
While seated upright, push lever in.
To release:
Pull lever out.
Engage the tilt lock when you want to sit in an upright or partially
reclined position.
To position chair forward:
Recline slightly and pull right lever
up. Lean forward to desired angle.
To resume upright position:
Recline slightly and push right
lever down.
Engage forward tilt to support the thighs’ declined posture when performing
intensive tasks such as keyboarding.
