1
Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
, and
Z
are among the registered trademarks of Herman MIller, Inc.
TM
Envelop is among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b5j77 rev B.
Y
Envelop
™
Assembly Instructions
PARTS INCLUDED:
TOOLS REQUIRED:
1
Work Surface
2
Pin
Place the work surface on a clean flat surface.
For each tube, place a pin into the pin hole.
Make sure the flat side is pointing up as
shown in the figures above.
Ratchet
Left Support
Right Support
Tube (2)
Pin (2)
Cap Screw (4)
Button Head
Cap Screw (4)
3/16 Hex Socket
Shaft
Completed Views of Envelop
Assembly
