HermanMiller Embody 100210688 Скачать руководство пользователя страница 44

Страница: 44 / 128

2008 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.

™

, Embody, are trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make

changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YJ4 REV A

PARTS INCLUDED:

TOOLS REQUIRED:

T-27

Ratchet

Torque Wrench

Torx Button

Spine

Head Screw (2)

Tension
Adjustment Rod

Torx Bits

T-40

Bolts

Remove lower spine bolts using t-40 torx
wrench and remove spine.

Spine Cap
Screw

Using the T-27 Hand Tool remove the Spine
Cap Screws by turning in a counter-clockwise
direction.

Hinge
Covers

Remove both Hinge Covers.

Remove back tension adjustment rod by insert-
ing 1/16” allen wrench underneath rod to
release and then pulling out. (Chairs built prior
to 4/3/09 can be removed by wiggling up and
down while pulling out to disengage.)

1/16” Allen Wrench

Embody

™

Spine Replacement

Содержание Embody 100210688

































































































































Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Embody 100210688, Руководство пользователя

Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды