The Heritor
Gemini
Timepiece
(HR3801 – HR3806)
Mechanical automatic watches harness the kinetic energy contained within the natural movement of your arm to generate
the force required to operate. The watch will commence operation after a sufficient volume of initial power has been
generated by handling / wearing or by manually winding the crown. Supplemental winding through wear or manual winding
will ensure sustained functionality and increase the duration in which the watch will continue to operate when unworn.
Setting Instructions
1) Pull the crown to its most outward position.
2) Rotate the crown clockwise until the current time is displayed.
3) Push the crown in to its rest / manual winding position.
4) Manually wind the movement by rotating the crown clockwise 10-20 times.
Note:
Although manual winding is not necessary, generating an initial power reserve and occasionally
winding the movement manually will increase the duration in which the movement continues to
operate when the watch is not worn.
Water Resistance Guidelines
Note:
Manipulation of the crown while in contact with water will negate the rated water resistance as
water penetration may occur.
© Heritor
Rating
Submersible
Capacity of Resistance
No Marking
No
Splash/light contact only.
5ATM
No
Hand/dish washing.
10ATM
Yes
Low depth and short duration only.
20ATM
Yes
Short duration diving up to 5 meters.
25ATM+
Yes
Average depth and duration diving.