Operation Manual
BinTrac Breeder Control Operation Manual
Ver. 1.01 Rev 1.04
5
Part # MAN-000008
SEtUP
Figure 1
System Settings
The setup mode is used to configure the one-time system setup settings for each bin.
If there is no activity for 20 seconds while in SETUP mode, the system will exit SETUP mode and return to Weight
Display mode.
Accessing the Setup mode
This menu can be accessed with two methods:
1. This method requires you to power the device down and wait at least 3 seconds before
re-applying power to the system. When the device is powered up it will automatically
enter SETUP mode and display the Ver.
2. This method requires you to hold the SELECT button down for approximately
10 seconds, at which time SETUP mode will be displayed.
Segmented display:
Navigating Setup mode
To navigate through the options in Setup mode, you can use the
and the
keys to cycle
through the options/parameters. See Figure 1 for the SETUP menu flow chart.
Selecting an Option in Setup mode
To select an option/parameter to edit in SETUP mode, you must navigate to the option
you wish to edit. Navigate using the
and
keys, and then pressing the SELECT key
when you reach the desired option.
SETUP
Batch
Rated
Capacity
Increment
Full
Zero
Year
Month
Date
Hour
Minute
Station ID
Ver
SS.Ver
End
