background image

Page 5

For technical questions, please call 1-888-866-5797.

Item 56458 
        

TAbLE A:  RECOMMENDED MINIMUM WIRE 

GAUGE FOR EXTENSION CORDS* (120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

EXTENSION CORD 

LENGTH

25´

50´

75´ 100´ 150´

0 – 2.0

18

18

18

18

16

2.1 – 3.4

18

18

18

16

14

3.5 – 5.0

18

18

16

14

12

5.1 – 7.0

18

16

14

12

12

7.1 – 12.0

18

14

12

10

-

12.1 – 16.0

14

12

10

-

-

16.1 – 20.0

12

10

-

-

-

* based on limiting the line voltage drop to five volts at 

150% of the rated amperes.

Symbology

Double Insulated

V

Volts

~

Alternating Current

A

Amperes

n0 xxxx/min.

No Load Revolutions 
per Minute (RPM)

WARNING marking concerning Risk 
of Eye Injury.  Wear ANSI-approved 
safety goggles with side shields.

Read the manual before 
set-up and/or use.

WARNING marking 
concerning Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning 
Risk of Electric Shock.  
Properly connect power cord 
to appropriate outlet.

Warning Symbols and Definitions

 

This is the safety alert symbol.  It is used to 

alert you to potential personal injury hazards.  

Obey all safety messages that follow this symbol to 
avoid possible injury or death.

Indicates a hazardous 
situation which, if not 

avoided, will result in death or serious injury.

Indicates a hazardous 
situation which, if not 

avoided, could result in death or serious injury.

Indicates a hazardous 
situation which, if not 

avoided, could result in minor or moderate injury.

Addresses practices not 
related to personal injury.

Specifications

Electrical Rating

120VAC / 60Hz / 3A

No Load Speed

8000 - 13,000 OPM

Paper Attachment

Hook and Loop

Pad Size

5″ (127 mm)

SETUP - BEFORE USE:

  Read the ENTIRE IMPORTANT 

SAFETY INFORMATION section at the 
beginning of this manual including 
all text under subheadings therein 
before set up or use of this product.

Assembly

1.  Slide the 

Dust box

 onto the Dust Chute at the back 

of the Sander.  Push the Dust Box fully onto the Dust 
Chute using firm pressure.  Press the 

Lock Tabs

 

and release.  Lock the Tab Hooks into the Tab Slots.

2.  The collection of the dust will only work if the 

sandpaper has holes that line up with the 8 dust 
collection holes in the Backing Pad.  There are 
3 other holes in the Backing Pad for the Screws 
that attach the Backing Pad to the Sander.

Power Supply Requirements

120VAC, 60Hz

Содержание HE011









Отзывы: