MY20H06-2_1.0_26.08.2019
73
Operation
6.15.3 Adjusting the compression of the
Suntour fork
Only applies to pedelecs with this equipment
The compression adjuster makes it possible to
make quick adjustments to the suspension
behaviour of the fork to suit changes in terrain. It
is intended for adjustments made during the ride.
Figure 78: Suntour compression adjuster with the OPEN (1)
and LOCK (2) positions
Compression damping is lowest in the OPEN
position, making the fork feel softer. Use the
LOCK position if you want the fork to feel stiffer
and you are riding on soft ground. The lever
positions between the OPEN and LOCK positions
enable fine adjustment of compression damping.
We recommend setting the lever of the
compression adjuster to the OPEN position first.
6.16
Gear shift
The selection of the appropriate gear is a
prerequisite for a physically comfortable ride and
making sure that the electric drive system
functions properly. The ideal pedalling frequency
is between 70 and 80 revolutions per minute.
It is advisable to stop pedalling briefly when
changing gears. This makes it easier to switch
gears and reduces wear on the drivetrain.
6.16.1 Selecting gears
Only applies to pedelecs with this equipment
The speed and range can be increased while
applying the same force if you select the right
gear. Use the derailleur gears.
Figure 79: Down shifter (1) and up shifter (2) on the left (I) and
right (II) gear shift
Select the appropriate gear with the
shifter
.
The gear shift switches the gear.
The shifter returns to its original position.
Clean the rear derailleur if the gear change
blocks.
1
2
I
II
1
2
2
1
