MY21H02 - 12_1.0_19.10.2020
52
Operation
6.7.3
Pannier rack
The specialist dealer will advise on choosing a
suitable pannier rack.
The specialist dealer must install the pannier rack
the first time to ensure that it is safely fitted.
When installing a pannier rack, the specialist
dealer makes sure that the fastening mechanism
is suitable for the pedelec and that all components
are installed and firmly fastened. They will also
ensure that shift cables, brake cables,
hydraulic lines and electrical cables are adjusted
as necessary, the rider has optimum freedom of
movement and the pedelec's maximum permitted
total weight is not exceeded.
The specialist dealer will provide instruction on
how to handle the pedelec and the pannier rack.
6.7.4
Mobile holder
Only applies to pedelecs with this equipment
A holder for SP Connect mobile case is fitted to
the stem.
Observe the operating instructions for the mobile
and the SP Connect mobile case.
Use on tarmacked roads only.
Protect mobile from theft.
To attach: insert the SP Connect mobile case
in the holder and turn 90° to the right.
To release: turn the SP Connect mobile case
90° to the left and remove.
6.7.5
Suspension fork coil spring
If the desired suspension fork sag cannot be
achieved after adjustment, the coil spring
assembly must be replaced with a softer or harder
spring.
A softer coil spring assembly must be installed to
increase the sag.
A harder coil spring assembly must be installed to
decrease the sag.
6.7.6
Tubeless and airless
Riding a bike without tyre tubes reduces the risk
of tyre punctures and even avoids them
completely.
The specialist dealer will advise you on choosing
a suitable tyre system for the pedelec.
The conversion to tubeless or airless tyres must
be carried out by a specialist dealer to ensure the
safety.
