Heras HGD230, Руководство пользователя

Страница: 90 / 146

EN – Translation of the original user manual - 2.1 | 2019 90
7.21 INTEGRATED REAL-TIME CLOCK
The clock module integrated in the HMD230 can be used to move the gate
automatically, on the basis of an exact time schedule.
If the power supply to the motor drive is switched off, the date and time are kept
up to date for a couple of weeks. Automatic switch-over to summer or winter time
take place, according to EU rules. As a result, the clock is put forward one hour at
2 a.m. CET on the last Sunday of March and it is put back one hour at 3 a.m. CET
on the last Sunday of October.
7.21.1 Display date/time
Press the selector switch once to display the current date and time for 20 seconds.
You can access this menu option as follows:
•
Menu: "Clock/Calendar", activate "Display clock"
7.21.2 Setting the clock
The internal clock of the HMD230 has been factory-set. If this time ever differs
from the actual current time, the clock can be set as follows:
•
Menu: "Clock/Calendar", "Set date/time", "Year" and then set the last two
figures of the current year
•
Menu: "Clock/Calendar", "Set date/time", "Month": set the current month
•
Menu: "Clock/Calendar", "Set date/time", "Day": set the current day
•
Menu: "Clock/Calendar", "Set date/time", "Hour": set the current hour
•
Menu: "Clock/Calendar", "Set date/time", "Minutes": set the current
minutes
•
Menu: "Clock/Calendar", "Set date/time", "Seconds": set the current
seconds
•
Menu: "Clock/Calendar", "Set date/time", set "Autom.summer time" to
"1" in for automatic summer time switch-over according to the EU rules
• Menu: "Clock/Calendar, "Set date/time", set "Summer time now?" to "0"
in winter; and set it to "1" if the summer time has started
• Check the date and time with "Display clock"