Heras HGD230, Руководство пользователя

Страница: 13 / 146

EN – Translation of the original user manual - 2.1 | 2019 13
2 SAFETY
2.1 EXPLANATION OF THE SYMBOLS
Caution: To prevent personal injury, you must observe the safety
instructions below.
Note: To prevent material damage, you must observe the safety
instructions below.
Information: This is followed by further information or by a reference to
other documents.
Warning: Risk of limbs getting crushed
Warning: Risk of injury to hands by gear wheels
2.2 SAFETY DISTANCES
Safety distances apply for the area into which the gate slides in accordance with
EN 12453 for electrically driven sliding gates.
2.3 GENERAL SAFETY INSTRUCTIONS
•
The operator must read the entire user manual before the gate is used for
the first time. The instructions stated in the user manual must be
observed and complied with. All other forms of use can cause unexpected
hazards and are forbidden.
•
It is forbidden to apply the drive unit to gates other than those stated in
this manual, without Heras' permission.
•
Applying a third-party drive unit and/or safety edge may affect safety and
will invalidate the CE mark.
• The gate must only be put into use if all safety facilities are in place and
connected, and work properly.
• All faults which might present a source of danger to the user or to third
persons must be eliminated immediately.
• All warnings and safety notices on the equipment must be in place and
clearly legible at all times.