Heras CS UNI MID, Руководство пользователя

Страница: 14 / 30

EN – Translation of the original user manual - 1.0 | 2022 14
Illustration 4: Integrated locking pin
Surface-mounted locking pin
The surface-mounted locking pin is mounted on the gate leaf.
It consists of a locking lever and a locking pin. The tube can be slid in and out us-
ing the locking lever. To lock the gates properly, it must be possible for this tube to
sink at least 3 cm into the ground or the stop plate/block (available separately).
This lock cannot be locked when the gates are in the open position. When a double
gate is closed, however, the latch on the leaf is protected against unlocking.
Illustration 5: Surface-mounted locking pin
UNLOCKED
LOCKED
UNLOCKED LOCKED
locking lever
locking pin