Hensel-Visit Expert D 1000, Руководство пользователя

Страница: 24 / 76

Commissioning the device
24
Commissioning the device
To commission the device, proceed as follows:

Remove the transport cap (see page 25).

Remove the foam (see page 27).

Install the illuminant for the model light (see page 27).

Position the protection glass in place (see page 30).

Mount the light shaping tool (see page 31).

Connect the mains cable (see page 33).

Turn on the device at the main switch (see page 42).

Trigger a test flash (see page 42).

Check the function of the model light (see page 44).